Scan Head Control Interface
Label: COP-SHC
✓ Synchronous to all actuators
✓ Compatible with various laser scan heads
✓ Three scanner channels X, Y, Z
The COP-SHC module has specially been developed for the integration and control of laser scan heads from various producers. As example systems from Arges or SCANLAB. The Arges communication takes place via the HSSI protocol and the SCANLAB communication via the SL2-100 protocol.
Up to three scanner channels per module can be controlled and read back. The scanners are controlled synchronously with other actuators, such as multi servo drives and I/O systems.
The communications exchange takes place via an Ethernet cable (min. Cat 5). The COP-SHC module has fast digital outputs to control the laser enable or shutter coordinated to the axis movement. It is also possible to use the fast outputs as fast inputs, for example for trigger impulses. In addition, an RS485 or TTL level can be selected for the fast digital in- and outputs.
Contact us to learn more about this product
Protocols | SL2-100 / |
Channels | 3 (X, Y, Z) |
Positioning | 20 Bit (SL2-100) / |
Sampling rates | 100 kHz (SL2-100) / |
Interfaces | 2 x RJ-45 |
Digital inputs | 2 x TTL level |
Digital outputs | 2 x TTL level |
Dimensions | 100 x 80 mm (w × d) |
COP case requirement | 1 COP slot |
Label: COP-SHC Indel no.: 611855720 | Scan Head Control Interface HSSI
|
Label: COP-SHC Indel no.: 611855740 | Scan Head Control Interface SL-200
|